ADHESIVE FOR BONDING JOINTS
Instructions for use
G08.S.60 ADHESIVE
FOR BONDING JOINTS 60 ML. DOWNLOAD INSTRUCTION
FOR BONDING JOINTS 60 ML.
Product short description
- The adhesive is designed for adhesion of joints of architectural decor elements made of polyurethane foam.
- The adhesive layer can be colored.
- Positioning correction is possible.
- Cartridge 290 ml./ Tube 60 ml.
-
Clean the surface from dust
with slightly dampened cloth
and remove grease, if required. -
Using the gun, apply a line of adhesive
on the whole plane of the article joint,
put it on the base surface. -
Press with strength
and fix for 4-5 seconds. -
Remove emerged excess adhesive.
-
Complete binding occurs upon
expiry of 24 hours.
Use emery paper to treat the joint
after complete solidification.